|
| AIRCRAFTWIRE |
| 1/2" Aircraft Wire Reinforced Cable. You get the same construction as the IC Cable, plus front and rear fittings. Front fitting takes Electric eel "N" Series Tools. Rear fitting is for Electric Eel machines only, Especially Model N. |
|
| ECABLES |
| Expanded End Cables are most flexible coreless music wire cables feature expanded bulb-shaped ends to negotiate pipe traps and drain cross bars. Right-hand wound E cables - with 1/4", 5/16" and 3/8" diameters and lengths of 15' to 50' - are secured by a drill chuck instead of rear fittings, so they can be used with almost any manual or drill-type machine. |
|
| EICCABLE |
| Expanded End Aircraft Wire Reinforced Cables. left-hand wound, and with diameters of 5/16" and 3/8", these cables have the same construction as the two IC Cables mentioned - except these have the bulb end instead of tool attachment fittings. And because they have no rear fittings, you can use them with other makes of cleaners. |
|
| GFI |
| Ground Fault Interrupter (GFI) - Standard safety feature on Electric Eel products which cuts the power on the machine if the power cord is broken. |
|
| ICCCABLE |
| 5/16" and 3/8" Aircraft Wire Reinforced Cables. These left-hand wound cables include front fittings for Electric Eel Drop Head (DH) Tools. An outer layer of music wire is reinforced with an inner core of galvanised aircraft wire which adds to the stiffness and allows more "push" through stoppages. Primary uses are drill-type units. |
|
| MONOWIRE |
| 1/2" Monowire Drain Cable. This left-hand wound hollow core cable constructed of music wire comes in lengths of 3 - 100 foot and includes both front and rear fittings. Fronf fittings are for "N" Series tools and are used primarily with the Electric Eel Model N. |
|
| PTRAP |
| A "P" Trap is a pipeline which comes off a main pipelines which is designed to catch small debris and silt deposits. |
|
| RPM |
| Revolutions Per Minute. |
|
| TRIMAXCABLE |
| The TRIMAX Cable is the strongest cable on the market. This stress-relieved TRIMAX 3 element cable contains an inner-core cable made from right-hand wound galvanised aircraft wire, a protective plastic sheath that gueards against rust and corrosion and a tough, long-lasting outer layer of left-hand wound wire offering the same quality and tensile strength as music wire. |
|
